FREE SHIPPING! - 48-STATES ON ORDERS OVER $15
Shopping cart
$49.00
10" MIDRANGE LOUDSPEAKER

10MR2000-NDY

Out of stock

-

  • 10″ Midrange – 8 Ohm
  • Neodymium Magnet
  • 99 dB – 2000 Watts

$199.91

Out of stock

PRICE FOR SINGLE UNIT

Join the waitlist to be emailed when this product becomes available

SKU: 10MR2000-NDY Category: Tag:

Features

Features

The PRV Audio 10MR2000-NDY midrange offers outstanding durability and is our most powerful midrange loudspeaker with a 4 inch voice coil. This mid is an ideal option for high power 2 or 3-way systems. It produces excellent vocal support for stage monitors, custom car doors and stuntwalls.

A powerful neodymium motor keeps size and weight to a minimum to make it easy to install this mid in any system, even when you are short on space.

Highlights

  • 4″ Inside/Out copper clad voice coil wound on fiberglass former for high-temp performance – 8 Ohm
  • One of the most outstanding pro audio midrange for high SPL systems, this 2000 Watts 10″ midrange is one beast of a speaker!
  • Excellent performance in compact enclosures and custom car door panels.
  • During hard play, the large 4″ voice coil provides very high efficiency while providing smooth and accurate midbass response.

10MR2000-NDY Surround

All in all, the PRV Audio 10MR2000-NDY midrange is a great choice for anyone looking for a reliable, powerful midrange loudspeaker.

With excellent damping characteristics, the lightweight paper cone and accordion surround give this driver smooth response from 90 to 6,500 Hz for that incredibly clear vocal response that PRV midranges are known for.


10MR2000-NDY Magnet

The 4″ voice coil is wound on a fiberglass former to withstand enough heat to handle 2,000 watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP

  • 160 Hz at 12 dB per octave filter Crossover / BT12
  • 145 Hz at 18 dB per octave filter Crossover / BT18

The extensive venting through the motor and cast aluminum frame helps to dissipate that heat to keep power compression low even after extended periods of high output.


Technical Details

GENERAL SPECIFICATIONS

Nominal Diameter 10″ (254 mm)
Nominal impedance 8 Ohm
Nominal Power Handling* 1000 Watts
Continuous Program Power (RMS)** 2000 Watts
Max Peak Power*** 4000 Watts
Sensitivity 2.00V at 1m 99 dB
Recommended Hi Pass Crossover For Full Power Handling 160 Hz 12db Per Octave Crossover
Frequency Response 90 – 6,500 Hz
Voice Coil Diameter 4″ (101 mm)
Voice Coil Wire CCAW
Voice Coil Winding Depth 14.5 mm
Former Material Glass Fiber
Magnetic Gap Depth 9.0 mm
Frame Material Die Cast Aluminum
PRV Audio -10MR2000-NDY - Graphic
*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.

THIELE-SMALL PARAMETERS

Equivalent Volume Vas 27.98 l
Excursion Xmax*** 5.00 mm
Free Air Resonance Fs 54.48 Hz
Mechanical Factor Qms 1.54
Electrical Factor Qes 0.21
Total Factor Qts 0.21
Cone Area Sd 373 cm²
Mechanical Mass Mms 59.33 g
Bl Factor Bl 21.73 Tm
Dc Resistance Re 5.0 Ohm
Inductance Le 0.50 mH at 1 kHz
Mechanical Mass Without Air Mmd 35.96 g
Mechanical Compliance Cms 0.143 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

PRV Audio -10MR2000-NDY - Impedance

EXTRA INFO

Overall Diameter 10.43″ (265 mm)
Front Mount Baffle Cutout 9.33″ (237 mm)
Mounting Depth 5.08″ (129 mm)
Overall Depth (with grill) 5.49″ (139.5 mm)
Net Weight 12.78 Lb (5.8 kg)
Shipping Weight 14.55 Lb (6.6 kg)
Carton Dimensions W x L x H 12.6″ x 12.6″ x 7.8″ (320 x 320 x 195 mm)
PRV Audio 10MR2000-NDY
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.govView our Return Policy.

Customer Reviews

Based on 26 reviews
100%
(26)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
S.H.
two 10,s on a rodeglide

i installed two of these on my 21 roadglide today with a sd 1600.1 and i blieve my sadle bag's just might bust open. these things are so loud. great job prv.

A
Andrew Parkerson
Loudest

From my experience these are the loudest speaker that prv makes and they sound so clean I would say if u want long lasting, good midbass feel, and extremely loud I would 110% say these are worth every penny

E
E.P.
Amazing speaker well worth price

Put out great midbass loudness and quality of sound over all 100% great speakers

C
Carlos T.
👍🏽👍🏽👍🏽👍🏽👍🏽💯🔥

Just like the 12's these 10's are the best and they are by far killing any EV speakers... best bang for ur buck

S
Steven Hill
21 road glide

These speakers are loud.

×

Get your free gift!

PRV Lanyard
Orders above $50 get a
Free PRV Lanyard
PRV Microfiber Towel
Orders above $250 get a
Free PRV Microfiber Towel
PRV Banner
Orders above $500 get a
Free PRV Classic Banner
PRV Banner
Orders above $1000 get a
Free PRV Team Backpack