Free Shipping for all orders over $55
Shopping cart


(11 customer reviews)
In stock
  • 6″ Full Range – 8 Ohms
  • Ferrite Magnet
  • 92.5dB – 200 Watts


In stock


SKU: 6FR200 Category: Tag:


The PRV Audio FR Series sets a new standard of value in high-performance Full Range drivers. The 6FR200 full-range driver is an excellent choice when space is at an absolute minimum, eliminating the need for a tweeter.

This loudspeaker has a dual cone design, the primary cone handles low to midrange frequencies while the smaller secondary cone increases high-frequency response from 80 Hz to 20,000 Hz.
The combination of a low-distortion motor system with a copper ring and a unique woven-cloth dust cap provides exceptional clarity, detail, and dynamics at an impressive 92.5 dB of sensitivity.




  • Nominal Impedance: 8 Ohms
  • Rated AES Power Handling (RMS): 100 Watts
  • Program Power: 200 Watts
  • Sensitivity (1W/1m): 92.5 dB
  • Voice Coil Diameter: 1.5″

Technical Details


Nominal Diameter 6″ (152 mm)
Nominal impedance 8 Ohms
Rated AES Power Handling (RMS) 100 Watts
Program Power 200 Watts
Sensitivity 2.83V at 1m 92.5 dB
Recommended Hi Pass Crossover**
**For Full Power Handling
85 Hz**
**12db Per Octave Crossover
Frequency Response at -10dB 80 – 20,000 Hz
Voice Coil Diameter 1.5″ (38 mm)
Voice Coil Wire CCAW
Voice Coil Winding Depth 10.0 mm
Former Material Kapton
Magnetic Gap Depth 6.0 mm
Frame Material Stamped Steel



Equivalent Volume Vas 6.93 l
Excursion (mathematical)*** Xmax 3.50 mm
Free Air Resonance Fs 111.7 Hz
Mechanical Factor Qms 15.69
Electrical Factor Qes 1.40
Total Factor Qts 1.29
Cone Area Sd 143 cm²
Mechanical Mass Mms 8.37 g
Bl Factor Bl 5.17 Tm
Dc Resistance Re 6.4 Ohms
Inductance Le 0.264 mH at 1 kHz
Mechanical Mass Without Air Mmd 7.40 g
Mechanical Compliance Cms 0.242 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4


Overall Diameter 6.55” (166.5 mm)
Front Mount Baffle Cutout 5.73” (145.5 mm)
Mounting Depth 2.81” (71.5 mm)
Overall Depth 3.09” (78.5 mm)
Net Weight 2.78 Lbs (1.27 kg)
Shipping Weight 3.08 Lbs (1.4 kg)
Carton Dimensions W x L x H 6.89” x 6.89” x 3.74”
(175 x 175 x 95 mm)


Customer questions & answers

  1. 0 votes
    Q Which amp would be recommended for one pair of 6 FR200 speakers
    Asked by Gary on June 22, 2020 2:24 am

    You will need an amplifier that provides 400w at 4 ohms. Check out the Timpano TPT-800 2 OHM

Send me a notification for each new answer.

11 reviews for 6FR200

  1. Danny

    Picked up 4 of these to put in a sealed chamber on my rear deck crossed over at 90hz. Good god can they scream!!!! The mid-bass and the clarity is amazing. You cannot get a driver for this price that plays the hz that this one does.
    Great job prv!

  2. Jesse

  3. William Davis

  4. Moises Santiago

  5. Nathaniel Walker Jr.

  6. Carmen Nazario


  7. Tyresse

  8. Juan Martinez

  9. Anonymous

    Sound great!

  10. Jeff

    Super loud

  11. Darren

    I have not installed yet but if they sound like the delivery time I know they will be great..

Add a review

Your email address will not be published. Required fields are marked *

WARNING: Cancer and Reproductive Harm –