- Titanium HF Driver
- 1″ Exit Screw-On
- 109 dB – 160 Watts
PRICE FOR SINGLE UNIT
The NEW PRV Audio D280Ti-S Compression Driver offers a surprisingly smooth response and high efficiency from mid-range through high range frequencies thanks to the pure titanium diaphragm.
- Throat Diameter: 1″
- Type: Screw-On
- Nominal Impedance: 8 Ohms
- Rated AES Power Handling (RMS): 80 Watts
- Program Power: 160 Watts
Perfect for studio monitors and stage monitors, and stage speakers where high sound quality is required. A 2 and 3 or bolt pattern ensures easy replacement with current 1” bolt-on horns and weighs just 3.3 lbs. A standard 1 3/8” screw ensures easy replacement with current 1” horns and weighs just 3.3 lbs.
D280Ti-B and D280Ti-S is designed to ensure a quality sound and long lasting play in most any environment and in the rare event you need to make a repair to your driver, simple, quick diaphragm replacements are available.
|Exit Throat Diameter||1” (25.4mm)|
|Nominal impedance||8 Ohms|
|Rated AES Power Handling (RMS)||80 Watts|
|Program Power||160 Watts|
|Sensitivity 2.83V at 1m||109 dB|
|Recommended Hi Pass Crossover** **For Full Power Handling||1800 Hz** **12db Per Octave Crossover|
|Frequency Response at -10dB||1,300 – 20,000 Hz|
|Voice Coil Diameter||1.75”(44.4 mm)|
|Voice Coil Wire||CCAW|
|Voice Coil Former Material||Kapton|
|Flux Density||1.65 T|
|Overall Diameter||4.52” (115 mm)|
|Overall Depth||2.56” (65 mm)|
|Mounting Thread||1 3/8” 18 TPI|
|Net Weight||3.31 lbs (1.5 kg)|
|Shipping Weight||3.52 lbs (1.59 kg)|
|Carton Dimensions W x L x H||5.31” x 5.0” x 2.91” (135 x 127 x 74 mm)|
Questions & Answers (7)
Q Can this be used in car audioAsked by November 4, 2020 7:31 pmonA
Yes, this compression driver can be used in a Car Audio application.
Q Do I need a capacitors for this driver if am using a active crossoverAsked by August 14, 2020 3:57 pmonA
As long as your crossover will cut the frequencies below 1800hz, you do not need a capacitor.
Q If I'm using the PRV DSP 2.8X is it necessary to use the capacitor that comes included?Asked by October 15, 2019 11:03 pmonA
We recommend that you do not use the capacitor and use the DSP.
Q Am I able to use one of your replacement diaphragms other than titanium to compare how they sound in this same driver? Which ones will fit the d280?Asked by September 26, 2019 3:33 pmonA
The titanium diaphragm that comes in the D280Ti is proprietary to that driver because it is built into the back cover. Our other diaphragms will not interchange with this driver. You can see the replacement part here to get a better look at the diaphragm design.
Q What type of diaphragm material this driver has ?Asked by August 23, 2019 3:20 pmonAnswered by the admin
this driver has a Titanium diaphragm, for high fidelity on the high frequency response
I bought this driver for a stage monitor I was building and didn't want to spend a lot of money. After finishing the monitor, I compared it to my PA tweeters which are expensive jbl drivers and these sound WAY better! I am replacing the jbl drivers with these PRV drivers!