This is an OPEN BOX product that may have some scratches/marks due to previous installation. Product may not come in its original box. Final Sale product, not eligible for return. This product has been tested by our technician and it’s working as intended… 100% Guaranteed!
The new PRV TW1000Ph delivers the combination of pleasant crystal clear sound and long lasting quality.
The durable Phenolic Diaphragm is mounted inside and out to reduce the amount of moving mass, extending the high frequency response to a more natural sound than a metallic diaphragm. The bullet-shaped horn design on the TW1000Ph allows it to deliver a high output and longer throw with 40° x 40° dispersion.
The use of a 1.83” copper voice coil with an unique Aluminum back plate heatsink design improves the power handling and durability for any professional large environment application.
Type: Super Tweeter
Nominal Impedance: 8 Ohms
Rated AES Power Handling (RMS): 100 Watts
Program Power: 200 Watts
Voice Coil Diameter: 1.83″
Technical Details
GENERAL SPECIFICATIONS
Nominal impedance
8 Ohms
Rated AES Power Handling (RMS)
100 Watts
Program Power
200 Watts
Sensitivity 2.83V at 1m
106 dB
Recommended Hi Pass Crossover** **For Full Power Handling
5000 Hz** **12db Per Octave Crossover
Frequency Response at -10dB
4,000 – 20,000 Hz
Voice Coil Diameter
1.83”(46.5 mm)
Voice Coil Wire
Copper
Voice Coil Former Material
Kapton
Diaphragm Material
Phenolic
Flux Density
1.58 T
Magnet Material
Ferrite
*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.
Reviews
There are no reviews yet