- 10″ Woofer – 8 Ohm
- Neodymium Magnet
- 98 dB – 1000 Watts
PRICE FOR SINGLE UNIT
PRV Audio’s 10W1000-NDY Neodymium Woofer Loudspeaker was carefully crafted to reproduce a natural, smooth sound while remaining dynamic. The PRV Audio 10W1000-NDY is the evolution of our mid bass loudspeakers, our R&D department pushed the output limits on a mid bass driver, creating a unique sound reproduction.
- 3″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance – 8 Ohms
- 1000 watts continuous program power rating makes the high acoustical output
- 36 mm peak-to-peak excursion before damage
- 98 dB sensitivity, which makes it capable of generating a lot of output!
- Detailed vocal reproduction on a wide frequency band response
To get superior fidelity, the special composite cone is built with non-pressed paper for a reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.
The 10W1000-NDY is an extremely efficient 10″ woofer from PRV Audio. To stand up to the use and abuse of the professional sound environment we designed a 3″ CCAW voice coil that is wound inside-outside on fiberglass former and features a generous 18 mm winding length for extended Xmax and less distortion. (with a suggested 80 Hz, 12 dB/octave high pass filter in place)!
Its powerful optimized neodymium motor is vented to provide excellent cooling.
The large 3″ voice coil allows for the high 1,000-watt power handling and warrants the outstanding cooling system implemented into the motor.
The high sensitivity rating of 98 dB 1W/1M which makes it capable of generating a lot of output!
|Nominal Diameter||10″ (254 mm)|
|Nominal impedance||8 Ohms|
|Rated AES Power Handling (RMS)||500 Watts|
|Program Power||1000 Watts|
|Sensitivity 2.83V at 1m||98 dB|
|Recommended Hi-Pass Crossover**
**For Full Power Handling
**12db Per Octave Crossover
|Frequency Response at -10dB||55 – 5,500 Hz|
|Voice Coil Diameter||3″ (76 mm)|
|Voice Coil Wire||CCAW|
|Voice Coil Winding Depth||18.0 mm|
|Former Material||Fiber Glass|
|Magnetic Gap Depth||10.0 mm|
|Frame Material||Die Cast Aluminum|
|Equivalent Volume||Vas||39.0 l|
|Excursion (mathematical)***||Xmax||6.5 mm|
|Free Air Resonance||Fs||62.12 Hz|
|Cone Area||Sd||380 cm²|
|Mechanical Mass||Mms||33.93 g|
|Bl Factor||Bl||12.73 Tm|
|Dc Resistance||Re||5.1 Ohms|
|Inductance||Le||0.64 mH at 1 kHz|
|Mechanical Mass Without Air||Mmd||29.73 g|
|Mechanical Compliance||Cms||0.193 mm/N|
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4
|Overall Diameter||10.27” (261 mm)|
|Front Mount Baffle Cutout||9.05” (230 mm)|
|Mounting Depth||4.49” (114 mm)|
|Overall Depth||5.00” (127 mm)|
|Net Weight||8.38 lbs (3.8 kg)|
|Shipping Weight||9.70 lbs (4.4 kg)|
|Carton Dimensions W x L x H||11.2” x 11.2” x 5.71”
(285 x 285 x 145 mm)
Exceptional product by far one of the best hitting speaker with remarkable range
These speakers sound great and the mid bass is more then I thought it would be. Always a great surprise when it comes to this company ...
to me PRV it's just the best sound speaker out right now, the quality is just outstanding, I will buy again from them, I will recommend it 💯 percent 👍.
Hard Hitting MB