A1MH PRO 3K 1Ω
-
- Full Range Amp
- Class D – 1 Ohm
- 3000 Watts RMS 1Ω
This product is discontinued
and no longer available.
Features
Features
Prepare Yourself for Unique Performance!
PRV Audio A1MH line of amplifiers raises power amplification to a new standard of quality and usability. The A1MH line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, the A1MH line provides an unsurpassed efficiency rate of 80-90% in a compact Class D full range amplifier.
PRV Audio A1MH features a regulated power supply, able to constantly delivery power at a wide frequency range when working either at low or high voltage.
Built in high/low pass filters and a bass boost filter allow the use of this amplifier for a broader variety of applications – from deep bass all the way to high frequencies.
A1MH PRO 3K 1ohm – 3000 watts certified at 12.0 volts
– Amp Dyno Certified at 13.83 Volts at 1 Ohm: 3867 Watts
Highlights
- 3000 Watts Continuous Amplifier
- Full Range Class D
- Compact Design
- 4 Stage intelligent protection circuitry
- Cast aluminum brushed heatsink design
- LED power, clipping and protection indicators
- Bass Boost Level
- 1 Ohm stable
- 4 Gauge power/ground connectors
- 10 Gauge speaker terminals
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.govTechnical Details
GENERAL SPECIFICATIONS
| Impedance | 1 Ohm |
| Channels | 1 Channel |
| Max Output Power | 4100 Watts |
| Rated RMS Power at 14.4 V at 1 Ohm | 3920 Watts |
| Average Efficiency | 81% |
| Rated RMS Power at 12.6 V at 1 Ohm | 3445 Watts |
| Rated RMS Power at 12.0 V at 1 Ohm | 3000 Watts |
| Rated RMS Power at 12.6 V at 2 Ohms | 2050 Watts |
| Operating Voltage | 10 to 16 Volts |
| Minimum Capacity of Battery | 153 Ah |
| Recommended Capacity of Battery | 305 Ah |
| Recommended Fuse | 150 A |
| Minimum Power Wire | 4 Gauge |
| Minimum Speaker Wire | 10 Gauge |
| Frequency Response(+/-3dB) | 5 Hz to 25 kHz |
| Filter Controls | No |
| Low Pass Filter | 80 Hz to 25 kHz |
| High Pass Filter / Subsonic | 5 Hz to 80 Hz |
| Built-In EQ Controls | Bass EQ |
| Bass Boost Level | 0 to 12 dB |
| Bass Boost Frequency | 35 Hz to 70 Hz |
| Signal Input | 1 Pair RCA |
| Protection System | On Circuit Board |
| Fan System | 1 Fan |
| Heat Sink Type | Cast Aluminum |
| Dimensions ( H x W x L ) | 2.75″ x 8.50″ x 9″ |
| Weight | 6.62 Lbs |
