- Digital Signal Processor
- 2 Input Channels
- 8 Output Channels
- Built-In Remote Out
PRICE FOR SINGLE UNIT
Bringing innovation and technology to the Automotive Sound market, PRV Audio launches the DSP2.8X Digital Signal Processor, capable of making various adjustments, from filters, graphic and parametric equalization, alignment, phase inversion, limiter, audio generator, among others. Enhancing Your Audio System!
Through an LCD display and intuitive interface, it allows real-time audio adjustments. The DSP 2.8X features 2 audio inputs (A and B) and 8 independent outputs and allows you to choose the audio source (A, B or A + B) for each output. It has an integrated equalization system, with 15-band graphic equalizer, manual tuning, or through 12 presets (Flat, Loudness, Bass Boost, Mid Bass, Treble Boost, Powerful, Electronic, Rock, Hip Hop, Pop, Vocal and Pancadão).
For professional equalization adjustments, it has 1 INPUT Parametric Equalizer and 1 OUTPUT Parametric Equalizer with gain control, specific frequency setting, and equalizer bandwidth, allowing fine adjustments and detailed equalization control.
The Crossover function allows you to precisely define the cut frequencies, attenuation rates, and topology of the LowPass and HighPass filters with Butterworth and Linkwitz-Riley filters (12/18/24/36/48 dB / 8ª).
To aid in the protection of amplifiers and loudspeakers, the DSP 2.8X features a Limiter with Dynamic Attack-Release system that dynamically controls the Attack and Release parameters in real-time, providing security and sound fidelity.
In the audio treatment, it also has Alignment capabilities through High Accuracy Delay, Phase Inversion, Independent Gain by Output and Master Level. For accurate measurements and adjustments, the DSP 2.8X features an integrated Audio Generator with tone generation and frequency sweep, and Pink Noise. Configuration Copy functions between output channels.
It also has the functions of Management, Save and Load Settings in memory, Security Password that blocks the editing of the parameters, Marquee / Text Display, and Language Selection.
Allows sequential triggering of other products through the remote trigger connection (REM). Use a cable of at least 20 AWG. The sequencer has three outputs (S1, S2, and S3) which are sequentially activated and deactivated according to the input signal from the remote input (REM IN).
The triggering interval between each output can be set from 0s to 4s. When the set time is 0s, all three outputs will be enabled and disabled at the same time after 3s of the input remote (REM IN) signal change.
- Number of processors (DSPs): 1
- Input Channels: 2
- Output Channels: 8
- Display: LCD16x2 Characters
- Built-In Remote Out ( Sequencer )
|Number of processors (DSPs)||1|
|Master Level||0 ~ 100%|
|Graphic Equalizer||15 Band|
|Graphic Equalizer Presets||12|
|Parametric Equalizer Input||1|
|Parametric Equalizer Output||8 / 1 per Channel|
|Routing||A,B / A+B|
|Crossover Butterworth (dB/8ª)||12/18/24/36/48|
|Crossover Linkwitz-Riley (dB/8ª)||12/18/24/36/48|
|Delay||0 to 8 ms (275 cm)|
|Frequency Generator||10Hz – 22kHz, Level -60 at 0dB|
|Frequency Scan||10Hz – 22kHz / Level -60 at 0dB / Control of speed|
|Frequency Response(+/-3dB)||10Hz @ 22.5kHz @ -1dB|
|Signal to Noise||>90dB|
|Channel Separation||> 80 dB|
|Maximum Input Voltage||5,6 Vpp (+8,2 dBu)|
|Maximum Output Voltage||5,6 Vpp (+8,2 dBu)|
|Supply Voltage||10V to 15V DC|
|Dimensions (HxWxL)||1.45″ x 7.87″ x 3.97″|
Questions & Answers (13)
Q Hola estos crosover vienen en sterio o monoAsked by June 2, 2021 10:39 amonAnswered by the adminse puede configurar como mono o estéreo, las 8 salidas son totalmente configurables.It can be configured as mono or stereo, all 8 outputs are fully configurable.
Q Can i use this with my mono amp and 4 channel amp?Asked by May 25, 2021 3:34 amonAnswered by the admin Absolutely! the DSP has 8 channel outputs, you can assign any of the output to any frequency range you would like to any amplifier
Q can it do bandpass on 8 channels?Asked by May 25, 2021 1:02 amonAnswered by the admin Yes, You can apply for every channel a High Pass Filter and Low Pass Filter
Q Is the unit BluetoothAsked by May 17, 2021 10:59 pmonAnswered by the admin No, none of our units are Bluetooth.
Q With this DSP do I need to run an equalizer?Asked by April 16, 2020 4:47 amonA
The DSP 2.8X has a built in equalizer with presets. You can use an external equalizer if you wish. You can use up to 2 with this DSP.
Extremely good product fine tune possibilities are endless
Best of the best great customer service Tim rocks he help me set up my system
Best DSP on the market !!! And Ive had them all !