FREE SHIPPING! - 48-STATES ON ORDERS OVER $15
Shopping cart
$0.00
4 Channel Mini Full Range Amp

SQ1000.4 2Ω

Out of stock

-

  • Full Range Amp
  • Compact 4 Channel
  • 4x 260 Watts 2Ω

This product is discontinued
and no longer available.

SKU: SQ1000.4 2 Ohm Category:

Features

Features

X Series digital amplifiers are all about ultra compact design, where performance is not sacrificed!


SQ800-4---FB-Highlight
  • Max Output Power of 1040 Watts RMS Dynamically, 4x 260 Watts at 2 Ohms- 4 Channel full range amplifier stable at 2 Ohms each gives you the benefit to wire multiple speakers and dividing the power.
  • Ultra Compact Design, where performance is not sacrificed! Dimensions: 6.90″ Wide x 4.45″ Length x 2″ Height
  • Engineered to be the most efficient full range amplifier so that you can get the most out of your vehicle’s electrical system!
  • 8 Gauge power/ground connectors and 8 Gauge speaker terminals

Our engineering team focused on achieving fidelity first, and then on making our X Series amplifiers amazingly efficient and small.

  • The SQ1000.4 2 Ohm is rated at 4x 250 Watts RMS at 14.0 volts with 80% efficiency.
  • Bridgeable: Double the power output to your speakers by bridging two channels. Minimum impedance of 4 Ohms per bridged channel at output power of 2 x 560 Watts RMS

Temporary-SQ8004-detailed-pic

Number of Channels: 4
Mini Amplifier
RMS Power at 2 Ohms 14.4 Volts: 4x 260 Watts RMS
RMS Power at 4 Ohms 14.4 Volts: 4x 200 Watts RMS
Bridged RMS Power at 4 Ohms 14.4 Volts: 2x 520 Watts RMS
Supply Voltage: 10 ~ 16V
Frequency Response: 20Hz ~ 25KHz
Channel 1&2 Crossover High Pass Filter: 100Hz or 500Hz
Channel 3&4 Crossover High Pass Filter: 100Hz or 1200Hz
Consumption with Signal Musical: 5A ~ 60A
Dimensions (W x D x H): 6.90” x 4.45” x 2.00”
Weight: 2.45 Lbs

The new line of technology features the most compact and enhanced design in the market, dedicated for motorsports application such as: Custom Motorcycles, ATVs and Slingshots! Its small heatsink offers high fidelity sound, with precise midbass punch and crystal clear highs.


Before Installing:

You must follow the instructions for the product’s installation to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to equipment.

• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference;

• Always use 100% Copper wire and good quality connectors. This guarantees reliability and performance.

• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: For this amp use a 60A fuse 12 inches away from the battery as a safety precaution

The power rating data is based on equipment from the PRV Audio Group laboratory. Rated power tested with 100Hz to 1KHz sinusoidal signal and THD <= 1%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant  load ) is not recommended.

PRV Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use.

Technical Details

GENERAL SPECIFICATIONS

Impedance 2 Ohm
Channels 4 Channel
Rated RMS Power at 13.0 V at 2 Ohm 4x 200 Watts RMS
Rated RMS Power at 13.0 V at 4 Ohm 4x 160 Watts RMS
Bridged Rated RMS Power at 13.0 V at 4 Ohm 2x 400 Watts RMS
Rated RMS Power at 14.4 V at 2 Ohm 4x 260 Watts RMS
Bridged Rated RMS Power at 14.4 V at 4 Ohm 2x 520 Watts RMS
Average Efficiency 80%
Operating Voltage 10 to 16 Volts
Musical Current Draw 60 A
Minimal Power Wire Input (OFC) 8 Gauge wires
Minimal Speaker Wire Output 14 Gauge
Frequency Response(-3dB) 20 – 25,000 Hz
Min. Input Sensitivity for Max. Output 290 mV
Signal Input 1 Pair RCA
Signal to Noise >90 dB
Protection System Low & High Supply Voltage / Shortage on Output / Low Impedance on Output
Heat Sink Type Heavy Duty Cast Aluminum
Dimensions ( Width x Depth x Height ) 6.90″ x 4.45″ x 2″
Weight 2.95 Lbs
The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 100Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.govView our Return Policy.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
R.T.
Very powerful

I have 2 6.5inch and 2 8inch prv carbon fiber mid range speakers and I can't even turn the amp up all the way because its so loud