1" EXIT PHENOLIC COMPRESSION DRIVER
D275Ph-S
-
- 1″ Midrange Driver
- Phenolic Diaphragm
- 107 dB – 200 Watts
$37.91
In stock
PRICE FOR SINGLE UNIT
Features
Features
This powerful 1” Exit Phenolic driver, the D275Ph-S is all about midrange vocal reproduction at low distortion. Built to last with its phenolic diaphragm and copper voice coil, that are designed to reproduce the all-important vocal range with authority!
![D275Ph-s 200 Watts Program Power | 100 Watts RMS | Frequency Response: 500-6500Hz](https://prvaudio.com/wp-content/uploads/2024/04/D275Ph-S-Product-Higlight.jpg)
- High Temperature copper voice coil and phenolic diaphragm for natural response
- Designed for midrange and vocals from 500 to 6,500 Hz
- High Output – 107 dB sensitivity
- The large 2 inch voice coil can handle up to 200 watts of musical power.
![D275Ph-S with diaphragm](https://prvaudio.com/wp-content/uploads/2024/04/D275Ph-S-Highlight-Diaphragm.jpg)
TRIO by PRV uses the latest Brazilian phenolic technology designed for vocal reproduction.
The phenolic diaphragm is attached to a 2″ diameter copper wire with Kapton® former for a high 200 Watts RMS musical power handling, when used with recommended HPF:
- 600 Hz at 12 dB per octave filter Crossover / BT12
- 500 Hz at 18 dB per octave filter Crossover / BT18
Its incredible output capabilities make this midrange driver one of the loudest vocal drivers on the market!
PRV Trio 1″ Midrange Driver D275Ph-S 200 Watts 8 Ohm – Phenolic Diaphragm
Technical Details
GENERAL SPECIFICATIONS
Exit Throat Diameter | 1” (25.4mm) |
Nominal impedance | 8 Ohm |
Nominal Power Handling | 100 Watts |
Continuous Program Power (RMS) | 200 Watts |
Peak Power | 400 Watts |
Sensitivity 2.83V at 1m | 106 dB |
Recommended Hi Pass Crossover** **For Full Power Handling | 600 Hz** **12db Per Octave Crossover |
Frequency Response at -10dB5 | 500 – 6,500 Hz |
Voice Coil Diameter | 2″ (51 mm) |
Voice Coil Wire | Copper |
Voice Coil Former Material | Kapton |
Diaphragm Material | Phenolic Resin |
Flux Density | 1.1 T |
Magnet Material | Ferrite |
EXTRA INFO
Overall Diameter | 4.61” (117 mm) |
Overall Depth | 2.67” (68 mm) |
Mounting Thread | 1-3/8″ 18 TPI |
Net Weight | 1.91 lbs (0.87 kg) |
Shipping Weight | 2.03 lbs (0.92 kg) |
Carton Dimensions W x L x H | 5.0” x 5.0” x 3.0” (127 x 127 x 75 mm) |
Repair Parts
Replacement Diaphragm for D275Ph-S
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.govView our Return Policy.
You may also like…
-
Out of Stock
WGP14-25 CHROME-S
- 1″ Exit Screw-On
- 3.98″ Mounting Depth
- Chrome Finish
-
EX4.6 PRO
- 4-Way Electronic Crossover
- 3 Input Channels
- 4 Output Channels
-
TW700Ti
- Titanium Tweeter
- Ferrite Magnet
- 107 dB – 240 Watts
-
D2200Ph
- 2″ Midrange Driver
- Phenolic Diaphragm
- 107 dB – 200 Watts