Free Shipping for all orders over $55
Shopping cart


(19 customer reviews)
In stock
  • 10″ Mid Range – 8 Ohms
  • Ferrite Magnet
  • 100 dB – 1000 Watts


In stock


SKU: 10MR1000X Categories: , Tag:


X-treme mid range performance is what PRV Audio’s 10MR1000X is all about. The PRV Audio 10MR1000X is the evolution of our line, after intense 2 years of development we have created the mid range loudspeaker that offers outstanding durability. This specially designed loudspeaker is assembled with top of the line components for long lasting play, even during intense use.



  • 3″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 ohms
  • 1,000 watts continuous program power rating makes high acoustical output
  • Excellent performance in compact enclosures
  • 100 dB sensitivity, which makes it capable of generating a lot of output!
  • Detailed vocal reproduction, high fidelity response


A coated woven surround offers smooth, precise geometry during hard play. The light weight cone provides excellent linear response up to 3 kHz, making the 10MR1000X a great solution for high quality two or three-way systems.


Extreme car audio enthusiasts will find PRV Audio’s 10MR1000X to be the perfect 10? mid range door speaker, capable of handling up to 500 watts RMS power (with a suggested 140 Hz, 18 dB/octave high pass filter in place)! The large magnet assembly is attached to a sturdy, reinforced cast-aluminum frame.

High power handling at sensitivity rating of 100 dB 1W/1M which makes it capable of generating a lot of output!

RK10MR1000X Website Highlight

The 3″ inside/outside copper voice coil is wrapped on a glass fiber former for heat resistance and high efficiency, while providing smooth and accurate response. Not only can it handle the force of 500 watts RMS, it does so while remaining linear from 300 to 3,000 Hz. 

Technical Details


Nominal Diameter 10″ (254 mm)
Nominal impedance 8 Ohms
Rated AES Power Handling (RMS) 500 Watts
Program Power 1000 Watts
Sensitivity 2.83V at 1m 100 dB
Recommended Hi Pass Crossover**
**For Full Power Handling
150 Hz**
**12db Per Octave Crossover
Frequency Response at -10dB 75 – 6,500 Hz
Voice Coil Diameter 3″ (76 mm)
Voice Coil Wire Copper
Voice Coil Winding Depth 9.0 mm
Former Material Glass Fiber
Magnetic Gap Depth 8.0 mm
Frame Material Die Cast Aluminum



Equivalent Volume Vas 28.68 l
Excursion (mathematical)*** Xmax 2.50 mm
Free Air Resonance Fs 72.02 Hz
Mechanical Factor Qms 11.22
Electrical Factor Qes 0.23
Total Factor Qts 0.22
Cone Area Sd 391 cm²
Mechanical Mass Mms 36.26 g
Bl Factor Bl 19.42 Tm
Dc Resistance Re 5.2 Ohms
Inductance Le 0.43 mH at 1 kHz
Mechanical Mass Without Air Mmd 31.89 g
Mechanical Compliance Cms 0.134 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4


Overall Diameter 10.23” (260 mm)
Front Mount Baffle Cutout 9.01” (229 mm)
Mounting Depth 4.27” (108.5 mm)
Overall Depth 4.84” (123 mm)
Net Weight 15.43 Lbs (7.0 kg)
Shipping Weight 16.53 Lbs (7.5 kg)
Carton Dimensions W x L x H 11.22” x 11.22” x 6.89”
(285 x 285 x 175 mm)


Customer questions & answers

  1. 0 votes
    Q Quiero 4 speaker para la amplifiers 8k, la quiero poner en la puerta del carro y queria saber de esta bocina seria mejor voz en la puerta Del carro, esta de 10mr1000x, O 10MR800A O, las de 10 chicheros. Voy hacer un door custums. Y quiero estar satisfecho con las bocina
    Asked by htorres8013 on June 21, 2020 7:57 pm

    4 bocinas para un amplificador 8k, el mejor es 10MR2000-NDY

  2. 0 votes
    Q I have 2 prv chucheros can I take out the 2 10s in there and run these on the same crossover That comes in it?
    Asked by Matthew Santiago on April 8, 2020 5:45 am

    The 10MR1000X will fit in the box and you can use it with the built in crossover. However, these speakers will want much more power than the 10MB400 that comes with the Chuchero system and the crossover is only rated at 275w RMS. The crossover is really designed to use the products that come with it. 

  3. 0 votes
    Q The price is one pair or one speaker?
    Asked by Alexis on February 20, 2020 2:07 pm

    Price is for one speaker.

  4. 0 votes
    Q Can I run 4 of the 1000x and 2 of the 8MB700FT-NDY together and if so what amp would I need
    Asked by Haynes on January 21, 2020 4:27 pm

    These speakers have different power handling and also play very different frequencies. You must put them on separate amplifiers. 

  5. 0 votes
    Q What size amp and wire would I need to run 4?
    Asked by Chris on January 20, 2020 1:09 pm

    You can use a PRV A1MH PRO 2 ohm (3000w). If it was not free air you could put more power. However, with a free air installation there is no resistance on the cone and it could move excessively with too much power. You can use 12ga speaker wire.


Send me a notification for each new answer.

19 reviews for 10MR1000X

  1. abiezer acosta

    Happy it got here not damage and quality is great speakers sound amazing

  2. Willy P.

  3. Willy Preciado H.

    Excellent service

  4. Nelson DeJesus

  5. Lenny

    Great speakers . only got 2 to try them out . and wow . all i can say is wow. better power them correctly and have all the right accessories . Good Job Prv .

  6. Lenny

    Great speakers . only got 2 to try them out . and wow . all i can say is wow. better power them correctly and have all the right accessories . Good Job Prv.

  7. Kelvin D.

  8. Jack Mathews

  9. Adrian

  10. Angel Caraballo

  11. Miguel A.

    They sound amazing!!

  12. Steven Burton

  13. Jonathan G.

  14. Anonymous


  15. Anonymous

  16. Marcus Garner

  17. Jose P.

  18. raul sierra

  19. Juan Hernandez

    Speakers are loud,best part,are the recommendations how to crossover the speakers for safe and clear sound

Add a review

Your email address will not be published. Required fields are marked *

Repair Parts

Recone Kit for 10MR1000X Loudspeaker


WARNING: Cancer and Reproductive Harm –