Features

X-treme midrange performance is what PRV Audio’s 10MR1200X is all about. Thanks to its high 101 dB Sensitivity, this 10″ professional midrange driver is perfect for filling in the vocal range in the largest SPL systems.

X Series is dedicated to delivering extreme midrange performance, capable of high output and high power handling, while delivering a smooth vocal response. Available in 12” – 12MR1200X

• 1200 Watts RMS continuous program power rating makes high acoustical output
• Ventilated voice coil gap reduces power compression for its 3″ Inside/Out voice coil wound on glass fiber former for hi-temp performance, 8 Ohm
• Detailed vocal response and pristine instrument sound reproduction
• Excellent performance in compact enclosures, and custom doors
• 101 dB – High efficiency, you do not need a lot of power to achieve extreme SPL levels

Designed for extreme car audio enthusiasts, PRV Audio’s 10MR1200X loudspeakers represent the ultimate in midrange performance.

Our R&D department pushed the output limits on a midrange speaker, creating unique sound reproduction and with high output levels, making it our top of the line midrange PRO audio speaker.

The light weight cone provides excellent vocal and instrument response, taking performance to the next level with high output levels over +133dB between 260 to 4,200Hz.

Designed to achieve consistent high output levels at low distortion for the best listening experience.

Everything about this speaker is designed to achieve consistent high output levels, when driven to its limits.

When pushed to incredible output levels, this mid can produce incredible dynamic tones and a deep vocal response that is unmatched due to its high power handling and 101 dB sensitivity.

Thanks to its 3″ inside/outside voice coil wrapped on a glass fiber former with reinforced glue for heat resistance, this mid can handle forces of 1200 watts RMS at ease.

Made to be a class leading midrange in the pro audio realm, this midrange loudspeaker is best in its class for professional audio or (musical instrument) speaker system applications, and large car audio competition systems.

PRV 10″ Midrange Speaker 10MR1200X 1200 Watts / 8 Ohm – High Output 3” Voice Coil PRO Audio Loudspeaker

Recommended Amplifier configurations and crossover points:

4 Speakers – 1x QS5000 at 2 Ohm, 4 speakers in parallel
8 Speakers – 1x QS9000 at 1 Ohm, 8 speakers in parallel

Recommended HPF using PRV Digital Signal Processor DSP when using up to 1200 Watts RMS musical power ( without clipping )

• 150 Hz at 12 dB per octave filter Crossover / BT12
• 140 Hz at 18 dB per octave filter Crossover / BT18

If you have compression drivers on your system the recommended LPF is 4,000 at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.

GENERAL SPECIFICATIONS

Nominal Diameter	10″ (254 mm)
Nominal impedance	8 Ohm
Nominal Power Handling*	600 Watts
Continuous Program Power (RMS)**	1200 Watts
Max Peak Power***	2400 Watts
Sensitivity 2.83V at 1m	101 dB
Recommended Hi Pass Crossover For Full Power Handling	150 Hz 12db Per Octave Crossover
Frequency Response	80 – 7,000 Hz
Voice Coil Diameter	3″ (75 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	10.0 mm
Former Material	Glass fiber
Magnetic Gap Depth	10.0 mm
Frame Material	Die Cast Aluminum

  ^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	21.8 l
Excursion (mathematical)***	Xmax	2.50 mm
Free Air Resonance	Fs	86.9 Hz
Mechanical Factor	Qms	6.97
Electrical Factor	Qes	0.30
Total Factor	Qts	0.29
Cone Area	Sd	394 cm²
Mechanical Mass	Mms	33.30 g
Bl Factor	Bl	17.50 Tm
Dc Resistance	Re	5.1 Ohm
Inductance	Le	0.52 mH at 1 kHz
Mechanical Mass Without Air	Mmd	28.84 g
Mechanical Compliance	Cms	0.100 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Magnetic Gap Depth/4

EXTRA INFO

Overall Diameter	10.31” (262 mm)
Front Mount Baffle Cutout	8.78” (223 mm)
Mounting Depth	4.45” (113 mm)
Overall Depth	5.04” (128 mm)
Net Weight	19.18 Lbs (8.70 kg)
Shipping Weight	20.17 Lbs (9.15 kg)
Carton Dimensions W x L x H	11.22″ x 11.22″ x 5.91” (285 x 285 x 150 mm)

Recone Kit for 10MR1200X Loudspeaker