- 10″ Mid Range – 8 Ohms
- Ferrite Magnet
- 101 dB – 800 Watts
This product is discontinued
and no longer available.
PRV Audio’s Alto Series loudspeakers were carefully crafted to reproduce a natural, smooth sound, while remaining dynamic. The PRV Audio 10MR800A is the evolution of our mid range loudspeakers, our R&D department pushed the output limits on a mid range driver, creating this unique sound reproduction.
This specially designed loudspeaker has a big brother the 12MR800A, which is also assembled with top of the line components for long lasting play, even during intense use.
- 3″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 ohms
- 800 watts continuous program power rating makes high acoustical output
- Excellent performance in compact enclosures and horn boxes
- 101 dB sensitivity, which makes it capable of generating a lot of output!
- Detailed vocal reproduction on a wide frequency band response
To get superior fidelity, the special composite cone is built with non-pressed paper for reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.
The 10MR800A is an extremely efficient 10″ midrange from PRV Audio. This driver is perfect for mating to compression drivers due to its wide frequency bandwidth and its high 101 dB sensitivity rating, on 3 way system (with a suggested 150 Hz, 12 dB/octave high pass filter in place)!
Its powerful optimized ferrite motor is vented to provide excellent cooling.
The large 3″ voice coil allows for the high 400-watt power handling, and warrants the outstanding cooling system implemented into the motor.
High sensitivity rating of 101 dB 1W/1M which makes it capable of generating a lot of output!
|Nominal Diameter||10″ (254 mm)|
|Nominal impedance||8 Ohms|
|Rated AES Power Handling (RMS)||400 Watts|
|Program Power||800 Watts|
|Sensitivity 2.83V at 1m||101 dB|
|Recommended Hi Pass Crossover**
**For Full Power Handling
**12db Per Octave Crossover
|Frequency Response at -10dB||100 – 6,700 Hz|
|Voice Coil Diameter||3″ (76 mm)|
|Voice Coil Wire||CCAW|
|Voice Coil Winding Depth||15.0 mm|
|Former Material||Glass Fiber|
|Magnetic Gap Depth||6.95 mm|
|Frame Material||Die Cast Aluminum|
|Equivalent Volume||Vas||16.20 l|
|Excursion (mathematical)***||Xmax||5.76 mm|
|Free Air Resonance||Fs||93.26 Hz|
|Cone Area||Sd||363 cm²|
|Mechanical Mass||Mms||33.08 g|
|Bl Factor||Bl||16.01 Tm|
|Dc Resistance||Re||5.3 Ohms|
|Inductance||Le||0.165 mH at 1 kHz|
|Mechanical Mass Without Air||Mmd||29.16 g|
|Mechanical Compliance||Cms||0.088 mm/N|
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4
|Overall Diameter||10.31” (262 mm)|
|Front Mount Baffle Cutout||9.25” ( 235 mm)|
|Mounting Depth||4.51” (114.5 mm)|
|Overall Depth||5.02” (127.5 mm)|
|Net Weight||16.97 Lbs (7.7 kg)|
|Shipping Weight||18.01 Lbs (8.17 kg)|
|Carton Dimensions W x L x H||11.41” x 11.41” x 5.90”
(290 x 290 x 150 mm)
Recone Kit for 10MR800A Loudspeaker
PRV makes the best products!!
Very impressive product well constructed and as usual very fast ship time