This is an OPEN BOX product that may have some scratches/marks due to previous installation. Product may not come in its original box. Final Sale product, not eligible for return. This product has been tested by our technician and it’s working as intended… 100% Guaranteed!
Add detail to any speaker with PRV Audio’s TW700Ti-4 SLIM titanium PRO Audio bullet super tweeter!
This tweeter is Slim version of our famous, powerful TW700ti. The new design features a Slim magnet and throat, making it the perfect Pro Audio On Wheels® tweeter for your car audio application.
4-inch square high compression PRO bullet tweeter features flat sides allow for close side by side mounting. With high frequency response up to 20,000 Hz and a sensitivity of 105 dB at 1W/1m, the TW700Ti-4 SLIM can keep up with your custom door speaker system.
High Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.
Type: Super Tweeter
Nominal Impedance: 4Ω
Rated AES Power Handling (RMS): 100 Watts
Program Power: 200 Watts
Voice Coil Diameter: 1.5″
Technical Details
GENERAL SPECIFICATIONS
Nominal impedance
4 Ohms
Rated AES Power Handling (RMS)
100 Watts
Program Power
200 Watts
Sensitivity 2.00V at 1m
105 dB
Recommended Hi Pass Crossover** **For Full Power Handling
5000 Hz** **12db Per Octave Crossover
Frequency Response at -10dB
4,500 – 20,000 Hz
Voice Coil Diameter
1.5” (38 mm)
Voice Coil Wire
CCAW
Voice Coil Former Material
Kapton
Diaphragm Material
Aluminum
Flux Density
1.50 T
Magnet Material
Ferrite
*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.