Free Shipping on orders above $200

Shopping cart


In stock
  • 8″ Mid Bass – 8 Ohms
  • Ferrite Magnet
  • 96 dB – 600 Watts


In stock

SKU: 8MB600FT Category: Tag:


PRV Audio’s Forte Series was specially tailored to give you more power handling and less distortion. The larger voice coil ensures high heat dissipation and the necessary Bl to deliver high sensitivity even on high power with the minimum distortion.

The lower Qts allows more precise mid bass. Superior fidelity is achieved through a perfect combination of a non-pressed cone with a smooth frequency response and a surround ring specially designed to allow high displacement without increasing the distortion.


  • Nominal Impedance: 8 Ohms
  • Rated Power Handling: 300 Watts
  • Program Power: 600 Watts
  • Sensitivity (1W/1m): 96 dB
  • Voice Coil Diameter: 2″

WARNING: Cancer and Reproductive Harm –

Technical Details


Nominal Diameter 8″ (203 mm)
Nominal impedance 8 Ohms
Rated Power Handling 300 Watts
Program Power 600 Watts
Sensitivity 2.83V at 1m 96 dB
Recommended Hi Pass Crossover**
**For Full Power Handling
110 Hz**
**12db Per Octave Crossover
Frequency Response at -10dB 105 – 6,500 Hz
Voice Coil Diameter 2.0″ (50 mm)
Voice Coil Wire CCAW
Voice Coil Winding Depth 14.0 mm
Former Material Kapton
Magnetic Gap Depth 6.8 mm
Frame Material Die cast aluminum



Equivalent Volume Vas 10.61 l
Excursion (mathematical)*** Xmax 5.30 mm
Free Air Resonance Fs 98.40 Hz
Mechanical Factor Qms 21.06
Electrical Factor Qes 0.55
Total Factor Qts 0.53
Cone Area Sd 241 cm²
Mechanical Mass Mms 19.91 g
Bl Factor Bl 10.85 Tm
Dc Resistance Re 5.3 Ohms
Inductance Le 0.38 mH at 1 kHz
Mechanical Mass Without Air Mmd 17.80 g
Mechanical Compliance Cms 0.131 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4


Overall Diameter 8.78” (223 mm)
Front Mount Baffle Cutout 7.20” (183 mm)
Mounting Depth 3.58” (91 mm)
Overall Depth 4.13” (105 mm)
Net Weight 9.13 Lbs (4.14 kg)
Shipping Weight 9.92 Lbs (4.50 kg)
Carton Dimensions W x L x H 8.85” x 8.85” x 4.72”
(225 x 225 x 120 mm)


Customer questions & answers

  1. 0 votes
    Answered by the admin

    You can bridged two channels and have 2x 8MB600FT wired in parallel in the bridged channel at 200 watts at 4ohms and you can set a crossover point - HPF between 90 to 110Hz and LPF 3000 to 5000hz depends of the enclosure they are in

  2. 0 votes
    Answered by the admin

    for this mid bass loudspeaker the best is having a high frequency compression driver with it from 1600hz and up

    We do have couple option on different power and output - 1" compression drivers 


    you can just use a Super Tweeter  with it


Send me a notification for each new answer.


There are no reviews yet.

Be the first to review “8MB600FT”

Your email address will not be published. Required fields are marked *

Repair Parts

Recone Kit for 8MB600FT Loudspeaker



PRV AUDIO 8MB600FT Loudspeaker