Shopping cart
Mini 2 Channel Full Range Amplifier

MDX2000.2 2 Ohm

In stock


  • Full Range Amp
  • MINI 2 Channel
  • 2x 1000 Watts 2Ω


In stock


SKU: MDX2000.2 2 Ohm Categories: , Tag:



The mini MDX2000.2 2 Ohm delivers 2000 Watts RMS power over 2 channels in a compact, modern amplifier.

Designed for high performance systems that require high power output but have very little space to spare, the MDX Series features exclusive and patented technologies that ensure a high definition sound quality in the most compact and reliable design.

Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly.

MDX2000.2 2 Ohm
  • A small footprint mini heavy duty heatsink make this micro amplifier easy to install anywhere in vehicles, motorcycles, 4-wheelers: Overall 8.50″ Width by 5.90″ Length and only 2.60″ Height.
  • 2 x 1000 watts at 2 Ohm TRUE RMS certified at full range output Digital Class D Brazilian Technology, gives you the benefit of wiring multiple speakers and dividing the power per channel.
  • 1 Channel Bridged – Double the power output to your speakers by bridging two channels. 1x 2000 Watts RMS at a minimum impedance of 4 Ohm on bridged channel.
  • The latest technology on surface mount components ensures best performance against vibration and superior sound quality, allowing enthusiasts and competitors to build the system of their dreams

The ability to choose between 2 or 1 channel configurations is one of this amp’s best features!

MDX2000.2 2 Ohm

When you use with 2 channel configuration, its high power output channels allow you to install 4x 8 Ohm speakers in parallel. You can take to a whole new level of stereo power and install just 2x 4 Ohm speakers in parallel giving 500w per speaker! Or just bridge it and turn it into a 1 channel amplifier.

1000 Watts at 2 Ohm per Channel
2000 Watts at 4 Ohm on Bridged Channel

The MDX Series is ideal for motorsport applications such as custom motorcycles, ATVs and Slingshots!

MDX2000.2 2 Ohm

High Output that takes up little space!

Featuring a mini heavy-duty heatsink, as well as a built-in cooling fan, this amplifier runs cool under even the most demanding playlists.

At only 3.95 lbs allows any custom system to achieve the highest performance and weight ratio possible..

PRV Audio MDX2000.2 2 Ohm MINI 2 Channel Car Audio Amplifier 2 x 1000 Watts RMS at 2 Ohm – High Power Stereo Amp

Before Installing:

You must follow the instructions for the product’s installation to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to equipment.

• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference; Minimum recommended installation distance between amplifier is 1.25”.

• Always use OFC 4 AWG Copper wire for power and ground and minimum of 12 AWG speaker wire and good quality connectors. Copper-clad aluminum wire (CCAW) must not be used. This guarantees reliability and performance.

• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: For this amp use a 100A fuse 12 inches away from the battery as a safety precaution.

The power rating data is based on equipment from the PRV Audio Group laboratory. Rated power tested with 60Hz to 1KHz sinusoidal signal and THD <= 1%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.

PRV Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use.

Technical Details


Impedance 2 Ohm per Channel
Channels 2 Channel
Rated RMS Power at 14.0 V at 2 Ohm 2x 1000 Watts RMS
Rated RMS Power at 14.0 V at 4 Ohm 2x 660 Watts RMS
Bridged Rated RMS Power at 14.0 V at 4 Ohm 1x 2000 Watts RMS
Average Efficiency 90%
Operating Voltage 8 to 16 Volts
Musical Current Draw 89 A
Minimal Power Wire Input (OFC) 4 Gauge wires
Built-in Crossover Fixed HPF & LPF at 80 Hz
Minimal Speaker Wire Output 12 Gauge
Frequency Response(-3dB) 10 – 22,000 Hz
Min. Input Sensitivity for Max. Output 0.2 to 4v
Signal Input RCA Cables
Signal to Noise >90 dB
Protection System High Temperature / Short circuit on Output
Heat Sink Type Mini Heavy Duty Cast Aluminum
Dimensions ( Width x Depth x Height ) 8.50″ x 5.90″ x 2.60″
Weight 3.95 Lbs
The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.
WARNING: Cancer and Reproductive Harm – our Return Policy.

You may also like…