6.5" MIDRANGE LOUDSPEAKER
6MR200A
- 6.5″ Midrange – 8 Ohm
- Shallow Mount
- 94 dB – 200 Watts
$24.91
In stock
PRICE FOR SINGLE UNIT
Features
Features
PRV Audio’s ALTO Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is used to smooth frequency response and to keep the moving mass low, increasing the efficiency.
- 6.5″ PRO audio Midrange speaker designed for Low Frequencies with shallow profile
- 200 watts RMS program power gives capability of high acoustical output with small amplifier
- Impressive choice for high output home, car, and professional audio systems – 8 Ohm Impedance
- Smooth response through the mid-bass and vocal range at at loudest volumes
To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.
The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.
This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.
PRV 6.5″ Midrange Speaker 6MR200A 200 Watts / 8 Ohm PRO Audio Loudspeaker
Technical Details
GENERAL SPECIFICATIONS
| Nominal Diameter | 6″ (152 mm) |
| Nominal impedance | 8 Ohms |
| Rated AES Power Handling (RMS) | 100 Watts |
| Program Power | 200 Watts |
| Sensitivity 2.83V at 1m | 94 dB |
| Recommended Hi Pass Crossover* *For Full Power Handling |
150 Hz** **12db Per Octave Crossover |
| Frequency Response at -10dB | 155 – 11,000 Hz |
| Voice Coil Diameter | 1.5″ (38 mm) |
| Voice Coil Wire | Copper |
| Voice Coil Winding Depth | 8.0 mm |
| Former Material | Kapton |
| Magnetic Gap Depth | 5.5 mm |
| Frame Material | Stamped Steel |
THIELE-SMALL PARAMETERS
| Equivalent Volume | Vas | 3.16 l |
| Excursion (mathematical)*** | Xmax | 2.62 mm |
| Free Air Resonance | Fs | 114.1 Hz |
| Mechanical Factor | Qms | 13.16 |
| Electrical Factor | Qes | 1.28 |
| Total Factor | Qts | 1.17 |
| Cone Area | Sd | 137 cm² |
| Mechanical Mass | Mms | 10.1 g |
| Bl Factor | Bl | 6.27 Tm |
| Dc Resistance | Re | 5.5 Ohms |
| Inductance | Le | 0.26 mH at 1 kHz |
| Mechanical Mass Without Air | Mmd | 9.02 g |
| Mechanical Compliance | Cms | 0.120 mm/N |
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4
EXTRA INFO
| Overall Diameter | 6.59″ (167.5 mm) |
| Front Mount Baffle Cutout | 5.69″ (144.5 mm) |
| Mounting Depth | 2.24″ (57 mm) |
| Overall Depth | 2.5″ (63.5 mm) |
| Net Weight | 3.52 Lbs (1.60 kg) |
| Shipping Weight | 3.79 Lbs (1.75 kg) |
| Carton Dimensions W x L x H | 7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm) |
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.govView our Return Policy.
48 reviews for 6MR200A
| 5 star | 91% | |
| 4 star | 6% | |
| 3 star | 2% | |
| 2 star | 0% | |
| 1 star | 0% |
Customer Images
1-10 of 48 reviews
Add a review
6MR200A
Your review
* Review is required
Name
* Name is required
Email
* Email is required
Add photos or video to your review
* Please tick the checkbox to proceed
Q & A
Ask a question
6MR200A
Your question
* Question is required
Name
* Name is required
Email
* Email is required
* Please tick the checkbox to proceed
There are no questions yet
I bought 6 of these MR200 speakers to get more vocals out paired with a stetsom 1600.1 1 ohm amp on a prv Dsp and it sounds amazing with the rest of my wife’s set up in her Jeep and we was blown away. She has 8 8 inch prv MB500 for midbass with 4 8s inside the jeep in her sound bar, 4 prv 280ti drivers in her back stunt wall and 8 350ti-4 ohm tweeters in series Parallel bringing them down to 2 ohms for all 8 tweeters and the results is breathtaking. Awesome Job Dan and the rest of the PRV team. You guys Rock.
I opted for the 6MR200A for a “budget” golf cart build and the speaker did not disappoint even though it is one of the more beginner speakers offered by PRV. We put 12 of them on the golf cart with 8x TW350Ti-4.
Great
I have not installed them yet but I know they are amazing. My cousin installs these speakers in all his cars. I had a problem with ordering 2 different size speakers with different ohms and the customer service was quick with a response and was able to help me with the problem. Shout out to the customer service.
they sound really good and clear !
PRV IS SLEPT ON!!! Any motorcycle I do installs to will have all prv audio! Sound is amazing and crystal clear!!
I can now crank up my music and have it come through crystal clear both instrumental and vocal wise.
Speakers haven’t been installed as yet. Overall weight and construction of speaker seems to be of good quality, can’t wait to install and hear these things talk.
that’s a verry good mid speaker in a three way configuration from 600 Hz to 6Khz, mid his clear with no coloration.
Très bon médium dans un système trois voies, 600 Hz à 6KHZ net et sans coloration
Great sound