6.5" MIDRANGE LOUDSPEAKER

6MR200A-4

In stock

6.5″ Midrange – 4 Ohm
Shallow Mount
94 dB – 200 Watts

$22.91

In stock

PRICE FOR SINGLE UNIT

SKU: 6MR200A-4 Categories: best-sellers, Low Frequency Speakers, PRO Audio on Wheels® Tags: ALTO SERIES, MIDRANGE

Features

PRV Audio’s ALTO Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is used to smooth frequency response and to keep the moving mass low, increasing the efficiency. The 6MR200A-4 midrange speaker is our solution for PROAudioOnWheels® for Car audio systems.

6.5″ Car audio midrange speaker designed for Low Frequencies with shallow profile
200 watts RMS program power gives capability of high acoustical output with small amplifier
Impressive choice for high output, car audio, and custom systems – 4 Ohm Impedance
Smooth response through the mid-bass and vocal range at at loudest volumes

To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.

The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.

This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.

PRV 6.5″ Midrange Car Speaker 6MR200A-4 200 Watts / 4 Ohm PRO Loudspeaker

Technical Details

GENERAL SPECIFICATIONS

Nominal Diameter	6.5″ (165 mm)
Nominal impedance	4 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.00V at 1m	94 dB
Recommended Hi Pass Crossover* *For Full Power Handling	150 Hz 12db Per Octave Crossover
Frequency Response at -10dB	155 – 11,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	5.5 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.} ^{**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation.} ^{***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	3.89 l
Excursion (mathematical)***	Xmax	2.62 mm
Free Air Resonance	Fs	138.3 Hz
Mechanical Factor	Qms	9.47
Electrical Factor	Qes	1.08
Total Factor	Qts	0.97
Cone Area	Sd	137 cm²
Mechanical Mass	Mms	8.89 g
Bl Factor	Bl	4.92 Tm
Dc Resistance	Re	3.4 Ohm
Inductance	Le	0.18 mH at 1 kHz
Mechanical Mass Without Air	Mmd	7.98 g
Mechanical Compliance	Cms	0.149 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.59″ (167.5 mm)
Front Mount Baffle Cutout	5.69″ (144.5 mm)
Mounting Depth	2.24″ (57 mm)
Overall Depth	2.50″ (63.5 mm)
Net Weight	3.52 Lbs (1.60 kg)
Shipping Weight	3.79 Lbs (1.75 kg)
Carton Dimensions W x L x H	7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm)

PRV AUDIO 6MR200A-4 DATASHEET Download

WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.govView our Return Policy.

I love the sound in the 6”

Very loud and clear

Would definitely buy again. Can't beat them for the price

Sounds Awesome!

I love my speakers. Very loud with a crisp sound to them. I put them in my Can-Am speaker pods. They get a lot of compliments! In my video I hadn’t messed with adjusting bass of my amp.

Sound great.

I'm, by no means, an expert or audiophile. But, for my use (built a stereo bluetooth speaker out of an old tool box) these speakers sounded great and were a great price. Fast shipping and very helpful customer service. Will be purchasing some other sizes of speakers as needed.

6mr200a 6.1/2

I had ran theses in a 2013 Chevy Malibu to start with and this past winter got t bone in it so on my new build I am running the same 6.1/2 in my doors with no amp and they are very impressive the shipping was fast as well and not damaged in any way will continue to use prv products in my builds

Very good

These 6.5 are next to none with the quality for the price and the motors are down right massive . But still easy to install nice and flush. Sound quality is great ! Overall a good speaker

Very good built speaker, really loud and crispy clear. Can not beat it for the price and performance. Good job PRV!

Awesome

Prv products are the best and very reliable

Great speakers

The best in my book

Fast shipping & quality

Bought a pair of 6.5 mid bass via their Amazon & 65 mid range straight from the website as replacements. Sound is awesome quality of the speaker is great. Fits flush on my Infiniti g20. I had planned on putting in subwoofers however this is all that was needed. I have friends telling me I’ve figured out how to get the best sound for the least $$

1 2 3

6MR200A-4

Features

Features

PRV 6.5″ Midrange Car Speaker 6MR200A-4 200 Watts / 4 Ohm PRO Loudspeaker

Technical Details

GENERAL SPECIFICATIONS

THIELE-SMALL PARAMETERS

EXTRA INFO

Customer Reviews

You may also like…

2x 6MR200A-4 + TW350Ti-4 SLIM (PAIR)

6MR500-NDY-4

6MR500CF-NDY-4 (PAIR)

6MR250B-4 SLIM

Compare