(COVID-19) Status Update: PRV Audio is open and is experiencing NO DELAYS in shipping orders at this time. FREE Shipping on Orders Above $75.00

Shopping cart


(1 customer review)
Out of stock
  • 10″ Mid Range – 8 Ohms
  • Neodymium Magnet
  • 99 dB – 1000 Watts


Out of stock


This product is currently out of stock. Receive an email when it is back in stock

SKU: 10MR1003-NDY Category: Tag:


The evolution of the 10MR1000 is here! The new 10MR1003-NDY is designed for maximum Mid Bass punch and Mid Range clarity to meet the demands of today’s High SPL systems. Featuring a new magnet motor, voice coil, and suspension components for long lasting play for intense use.

The 3” inside/outside wound copper clad aluminum wire voice coil ensures a high continuous power handling of 500 Watts RMS for consistent low distortion output even when driven to its limit.


  • Nominal Impedance: 8 Ohms
  • Rated AES Power Handling (RMS): 500 Watts
  • Program Power: 1000 Watts
  • Sensitivity (1W/1m): 99 dB
  • Voice Coil Diameter: 3″

WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Technical Details


Nominal Diameter 10″ (254 mm)
Nominal impedance 8 Ohms
Rated AES Power Handling (RMS) 500 Watts
Program Power 1000 Watts
Sensitivity 2.83V at 1m 99 dB
Recommended Hi Pass Crossover**
**For Full Power Handling
160 Hz**
**12db Per Octave Crossover
Frequency Response at -10dB 65 – 6,500 Hz
Voice Coil Diameter 3″ (75 mm)
Voice Coil Wire CCAW
Voice Coil Winding Depth 14.0 mm
Former Material Glass Fiber
Magnetic Gap Depth 6.0 mm
Frame Material Die Cast Aluminum



Equivalent Volume Vas 49.87 l
Excursion (mathematical)*** Xmax 5.50 mm
Free Air Resonance Fs 55.16 Hz
Mechanical Factor Qms 11.97
Electrical Factor Qes 0.24
Total Factor Qts 0.24
Cone Area Sd 405 cm²
Mechanical Mass Mms 38.18 g
Bl Factor Bl 17.58 Tm
Dc Resistance Re 5.7 Ohms
Inductance Le 0.76 mH at 1 kHz
Mechanical Mass Without Air Mmd 33.57 g
Mechanical Compliance Cms 0.218 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4


Overall Diameter 10.43” (265 mm)
Front Mount Baffle Cutout 9.33” ( 237 mm)
Mounting Depth 4.92” (125 mm)
Overall Depth 5.35” (136 mm)
Net Weight 9.23 Lbs (4.19 kg)
Shipping Weight 10.86 Lbs (4.93 kg)
Carton Dimensions W x L x H 12.6” x 12.6” x 7.8”
(320 x 320 x 195 mm)


Customer questions & answers

  1. 0 votes
    Q Can I run 6 of the 10MR1003-NDY with an 8k? answer now
    Asked by Kennette colon Rivera on April 16, 2020 6:32 am

    This speaker is rated at 1000w each. 

  2. 0 votes

    We recommend that you use a separate amplifier for the tweeters because of the power handling differences and also frequency range differences. You can use a PRV A1MH PRO 2 OHM amplifier for the 2 10MR1003-NDY. Wiring them both in parallel will bring them to a 4 ohm load. The A1MH PRO will produce about 2000w at 4 ohms which is perfect for these speakers. Follow this link: https://prvaudio.com/products/a1mh-pro-2/

Send me a notification for each new answer.

1 review for 10MR1003-NDY

  1. steven

    Perfect Speaker For Multiple or Single Use Can take abuse and power and provide the perfect clear sound you would be looking for

Add a review

Your email address will not be published. Required fields are marked *

Repair Parts

Recone Kit for 10MR1003-NDY Loudspeaker