This is an OPEN BOX product that may have some scratches/marks due to previous installation. Product may not come in its original box. Final Sale product, not eligible for return. This product has been tested by our technician and it’s working as intended… 100% Guaranteed!

X-treme midrange performance is what the PRV Audio 6MR600X-NDY-4 is all about.

The 6MR600X-NDY-4 from PRV Audio showcases the breakthrough advances of our product line like no other. After significant development, and assembling top of the line components, we have created a midrange loudspeaker that offers long lasting play, even during intense use, as well as outstanding durability.

The powerful halo neodymium magnet assembly assures high flux concentration. Its magnetic structure significantly improves thermal connection and heat dissipation. This increases power handling and lowers power compression, with an optimum power to weight ratio.

• 2″ Inside/Out voice coil wound on a hi-temp former, 4 Ohm
• 600 Watts RMS Power Handling, with a 97.5 dB Sensitivity, capable of generating very high output!
• Low inductance and extended frequency response with wide directivity
• New Generation of Halo Neodymium Magnet Structure
• Ideal solution for compact full-range applications demanding high acoustic output, also available at 8 Ohm
• Coaxial Performance from a single speaker

This is the ultimate midrange loudspeaker, the 6MR600X-NDY-4’s output on upper midrange frequencies compares to a compression driver! The naturally damped paper cone gives this speaker the ability to reach up to 13,000Hz.

Also, its extreme output eliminates the need for a high frequency compression driver in the system, providing 2-way coaxial performance from a single speaker!

Its high energy, rare-earth neodymium motor, combined with other fine materials, were chosen to increase sensitivity and power handling to deliver the finest details in audio, as demanded by most audiophiles and custom builders in the car audio and motorcycle custom builders.

This midrange takes performance to the next level with its wide frequency bandwidth, high output levels between 3,000 to 10,000Hz, and unbelievable 600 Watts RMS music power handling, completely eliminating the need for a compression driver on your system!

This midrange incorporates a 2” double layered copper clad aluminum wire voice coil, and a symmetrical inductance profile. Its 11 mm winding length also ensures high heat dissipation and high sensitivity, even on high power, and with minimum distortion.

Everything about this speaker has been designed for reliable and consistent high output levels, even when driven to its limit, allowing you to achieve high fidelity sound at low distortion for the best possible listening experience.

PRV 6.5″ Midrange Speaker 6MR600X-NDY-4 High Power 600 Watts / 4 Ohm – Neodymium Best In Its Class PRO Audio Loudspeaker

Recommended Amplifier configurations and crossover HPF using PRV Digital Signal Processor DSP when using the recommended power below:

Stereo Setup, One Speaker per Channel, no LPF.
4 Speakers – 1x MDX2000.4 2 Ohm, 1 speaker per channel
• 120 Hz at 18 dB per octave filter Crossover / BT18
when using up to 330 Watts RMS musical power

Front Stage Stereo Setup, One Speaker per Channel
2 Speakers – 1x MDX2000.2 2 Ohm, 1 speaker per channel
• 150 Hz at 18 dB per octave filter Crossover / BT18
when using up to 600 Watts RMS musical power

Custom System, Middle Power
4 Speakers – 1x MDX1800.1 1 Ohm, 4 speakers in parallel
• 130 Hz at 18 dB per octave filter Crossover / BT18
when using up to 450 Watts RMS musical power

Custom System, High Power
4 Speakers – 1x MDX2500.1 1 Ohm, 4 speakers in parallel
• 150 Hz at 18 dB per octave filter Crossover / BT18
when using up to 600 Watts RMS musical power

If you have compression drivers or super tweeters on your system the recommended LPF is 6,000 at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.