6MR600X-NDY-4
- 6.5″ Midrange – 4 Ohm
- Neodymium Magnet
- 97.5 dB – 600 Watts
$152.92
In stock
PRICE FOR SINGLE UNIT
Features
Features
X-treme midrange performance is what the PRV Audio 6MR600X-NDY-4 is all about.
The 6MR600X-NDY-4 from PRV Audio showcases the breakthrough advances of our product line like no other. After significant development, and assembling top of the line components, we have created a midrange loudspeaker that offers long lasting play, even during intense use, as well as outstanding durability.
The powerful halo neodymium magnet assembly assures high flux concentration. Its magnetic structure significantly improves thermal connection and heat dissipation. This increases power handling and lowers power compression, with an optimum power to weight ratio.
- 2″ Inside/Out voice coil wound on a hi-temp former, 4 Ohm
- 600 Watts RMS Power Handling, with a 97.5 dB Sensitivity, capable of generating very high output!
- Low inductance and extended frequency response with wide directivity
- New Generation of Halo Neodymium Magnet Structure
- Ideal solution for compact full-range applications demanding high acoustic output, also available at 8 Ohm
- Coaxial Performance from a single speaker
This is the ultimate midrange loudspeaker, the 6MR600X-NDY-4’s output on upper midrange frequencies compares to a compression driver! The naturally damped paper cone gives this speaker the ability to reach up to 13,000Hz.
Also, its extreme output eliminates the need for a high frequency compression driver in the system, providing 2-way coaxial performance from a single speaker!
Its high energy, rare-earth neodymium motor, combined with other fine materials, were chosen to increase sensitivity and power handling to deliver the finest details in audio, as demanded by most audiophiles and custom builders in the car audio and motorcycle custom builders.
This midrange takes performance to the next level with its wide frequency bandwidth, high output levels between 3,000 to 10,000Hz, and unbelievable 600 Watts RMS music power handling, completely eliminating the need for a compression driver on your system!
This midrange incorporates a 2” double layered copper clad aluminum wire voice coil, and a symmetrical inductance profile. Its 11 mm winding length also ensures high heat dissipation and high sensitivity, even on high power, and with minimum distortion.
Everything about this speaker has been designed for reliable and consistent high output levels, even when driven to its limit, allowing you to achieve high fidelity sound at low distortion for the best possible listening experience.
PRV 6.5″ Midrange Speaker 6MR600X-NDY-4 High Power 600 Watts / 4 Ohm – Neodymium Best In Its Class PRO Audio Loudspeaker
Recommended Amplifier configurations and crossover HPF using PRV Digital Signal Processor DSP when using the recommended power below:
Stereo Setup, One Speaker per Channel, no LPF.
4 Speakers – 1x MDX2000.4 2 Ohm, 1 speaker per channel
• 120 Hz at 18 dB per octave filter Crossover / BT18
when using up to 330 Watts RMS musical power
Front Stage Stereo Setup, One Speaker per Channel
2 Speakers – 1x MDX2000.2 2 Ohm, 1 speaker per channel
• 150 Hz at 18 dB per octave filter Crossover / BT18
when using up to 600 Watts RMS musical power
Custom System, Middle Power
4 Speakers – 1x MDX1800.1 1 Ohm, 4 speakers in parallel
• 130 Hz at 18 dB per octave filter Crossover / BT18
when using up to 450 Watts RMS musical power
Custom System, High Power
4 Speakers – 1x MDX2500.1 1 Ohm, 4 speakers in parallel
• 150 Hz at 18 dB per octave filter Crossover / BT18
when using up to 600 Watts RMS musical power
If you have compression drivers or super tweeters on your system the recommended LPF is 6,000 at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.
Technical Details
GENERAL SPECIFICATIONS
| Nominal Diameter | 6″ (152 mm) |
| Nominal impedance | 4 Ohm |
| Nominal Power Handling* | 300 Watts |
| Continuous Program Power (RMS)** | 600 Watts |
| Max Peak Power*** | 1200 Watts |
| Sensitivity 2.83V at 1m | 97.5 dB |
| Recommended Hi Pass Crossover For Full Power Handling | 160 Hz 12db Per Octave Crossover |
| Frequency Response | 90 – 13,000 Hz |
| Voice Coil Diameter | 2″ (50 mm) |
| Voice Coil Wire | CCAW |
| Voice Coil Winding Depth | 11.0 mm |
| Former Material | Kapton |
| Magnetic Gap Depth | 8.0 mm |
| Frame Material | Die Cast Aluminum |
THIELE-SMALL PARAMETERS
| Equivalent Volume | Vas | 5.17 l |
| Excursion (mathematical)*** | Xmax | 3.50 mm |
| Free Air Resonance | Fs | 95.2 Hz |
| Mechanical Factor | Qms | 12.54 |
| Electrical Factor | Qes | 0.20 |
| Total Factor | Qts | 0.19 |
| Cone Area | Sd | 143 cm² |
| Mechanical Mass | Mms | 15.45 g |
| Bl Factor | Bl | 12.66 Tm |
| Dc Resistance | Re | 3.4 Ohm |
| Inductance | Le | 0.005 mH at 1 kHz |
| Mechanical Mass Without Air | Mmd | 14.49 g |
| Mechanical Compliance | Cms | 0.180 mm/N |
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Magnetic Gap Depth/4
EXTRA INFO
| Overall Diameter | 6.48” (164.5 mm) |
| Front Mount Baffle Cutout | 5.63” (143 mm) |
| Mounting Depth | 3.09” (78.5 mm) |
| Overall Depth | 3.43” (87 mm) |
| Net Weight | 4.63 Lbs (2.1 kg) |
| Shipping Weight | 5.00 Lbs (2.3 kg) |
| Carton Dimensions W x L x H | 7.0”x 7.0” x 4.25” (178 x 178 x 108mm) |
Repair Parts
Recone Kit for 6MR600X-NDY-4 Loudspeaker
Videos
13 reviews for 6MR600X-NDY-4
| 5 star | 100% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Customer Images
6MR600X-NDY-4
Q & A
6MR600X-NDY-4
Great
These speakers sound clear as day one of the best speakers on the market i would definitely recommend them you get what you pay for.
Sounds great I had to buy two more for my truck
For starters these speakers are no joke loud with the right power. No paid for biased review. I have 4 of these running off of a 2000.2 running stereo. They not only get insanely loud but can handle that midbass pop with properly tuned crossover points.
Very good power handling and good sound im trying the 8 inch 4 ohms I need to handle a little power the the 6 inch r great im using it with the prv 3 way crossover
I installed four of these in my car doors and these speakers are retarded loud and clean!! They sound beautiful!! The inside of my car sounds as if I were to have 4 mid-range 10 inch and they only 6.5. I’ve been an audiophile for almost 20 years now installing and selling music systems. I’ve heard almost every speaker brand and size with various of head units, amps, batteries you name it and I never wrote a review ever!! But these speakers blew my mind I just don’t see how it’s even possible that 6.5 speaker can be so loud. Just as loud or louder than most 10″ 12″ inch mid-range speakers.
Le instale 4 a mi ford raptor 2018 y el sonido es indescriptible.
Esta bocina tienen mucha potencia y sonido claro
Haven’t run 600 watts thru them yet, but they definitely separates themselves from others at about 100 watts on my test bench. Looking forward to pushing them to tha limit!!
Compared to the oem speakers that were in my dodge charger these 6 1/2s made such an huge difference when it comes to sound and quality without a amp too it’s just amazing.
If your looking to upgrade I definitely recommend these as a go to !!
These speakers sound clear as day one of the best speakers on the market i would definitely recommend them you get what you pay for.