RS65-PRO (PAIR)
- 6.5” Car Speaker 4 Ohm
- Fullrange Mid
- 94 dB – 100 Watts
$59.42
In stock
PRICE PER PAIR
Features
Features
Meet our premium 6.5” car audio OEM Replacement RS65-PRO. Engineered to deliver high performance, these speakers are an excellent choice for audiophiles looking to replace their speakers in any car sound system with (2-Way Setup) speakers and tweeters.
Its most common application is to replace speakers in a system with a factory amplifier, which makes it a breeze to upgrade the sound system with only one speaker.
This fullrange speaker works great with a factory tuned amp with a set HPF and LPF. They will be a huge improvement compared to the low sensitivity stock speakers
- Its high sensitivity and wide frequency response make these the best OEM replacement speakers, powered by your stock or aftermarket radio.
- Small Profile – Designed for easier installation with its standard frame size that fits many OEM door speaker locations. 4 Ohm Impedance.
- Fullrange Speaker – Designed to reproduce a wide frequency range from 60Hz – 18,000Hz, it can play low midbass punch and high notes, delivering rich, detailed sound.
- These 6.5″ full range speakers utilize a high quality ultra lightweight cone, providing more accurate audio at 94dB sensitivity, superior to most stock car audio speakers.
RS65-PRO is designed for easy installation with a standard 6.5″ frame size that fits many OEM door speaker locations.
Although this speaker was designed to be powered by an amplifier, it can also be used in a factory or aftermarket radio for good sound quality and better clarity over OEM speakers.
The RS65-PRO will immerse you in the music no matter where you are in your vehicle by replacing your current speaker! Upgrade today and hear the difference!
This speaker is an excellent upgrade for listeners wanting to go beyond the standard factory component set. With frequency responses ranging from 60Hz – 18,000Hz it delivers sound across a wide frequency spectrum, so you can completely transform your system with just a speaker upgrade, combined with your stock tweeter.
What truly sets this unique speaker apart is its shallow mounting depth of only 2.44 inches with a small profile, which makes it ideal for tight spaces where full-sized speakers just won’t fit.
As the RS65-PRO has a sensitivity of 94 dB, it is extremely efficient at converting low power into sound, despite its slim design.
Built to perform and able to handle 100 Watts RMS each, these car speakers are the most ideal OEM replacement in a 3-Way or 2-Way component setup.
The RS65-PRO speakers do not require a large amount of power to operate. They get loud extremely easy with less than 200 watts RMS per pair making it suitable for use with the compact QS400.4 2 Ohm, installing 4 Speakers, one per Channel.
The RS Series brings new Subwoofers, amplifiers and car speakers with high-fidelity sound and performance for your everyday car system, specifically designed and developed for the car audio market.
PRV 6.5″ Fullrange Car Speaker RS65-PRO 200 Watts RMS / 4 Ohm PAIR – OEM Replacement
Technical Details
GENERAL SPECIFICATIONS
| Nominal Diameter | 6.5″ (152 mm) |
| Nominal impedance | 4 Ohm |
| Continuous Program Power (RMS)** | 100 Watts |
| Max Peak Power*** | 200 Watts |
| Sensitivity 2.00V at 1m | 94 dB |
| Frequency Response | 60 – 18,000 Hz |
| Voice Coil Diameter | 1.0″ (25.4 mm) |
| Voice Coil Wire | CCAW |
| Voice Coil Winding Depth | 9.20 mm |
| Former Material | Kapton |
| Magnetic Gap Depth | 5.0 mm |
| Frame Material | Stamped Steel |
THIELE-SMALL PARAMETERS
| Equivalent Volume | Vas | 5.77 l |
| Excursion (mathematical)*** | Xmax | 3.35 mm |
| Free Air Resonance | Fs | 131.6 Hz |
| Mechanical Factor | Qms | 10.15 |
| Electrical Factor | Qes | 1.18 |
| Total Factor | Qts | 1.06 |
| Cone Area | Sd | 154 cm² |
| Mechanical Mass | Mms | 8.37 g |
| Bl Factor | Bl | 4.46 Tm |
| Dc Resistance | Re | 3.4 Ohm |
| Inductance | Le | 0.16 mH at 1 kHz |
| Mechanical Mass Without Air | Mmd | 7.29 g |
| Mechanical Compliance | Cms | 0.175 mm/N |
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4
EXTRA INFO
| Overall Diameter | 6.57” (167 mm) |
| Front Mount Baffle Cutout | 5.75″ (146 mm) |
| Mounting Depth | 2.44” (62 mm) |
| Overall Depth | 2.76” (70 mm) |
| Net Weight | 2.70 Lbs (1.25 kg) |
| Shipping Weight | 6.95 Lbs (3.15 kg) |
| Carton Dimensions W x L x H | 16.53″ x 8.46″ x 4.33” (420 x 215 x 110 mm) |
RS65-PRO (PAIR)
Recommended Products
Q & A
RS65-PRO (PAIR)
Reviews
There are no reviews yet