WG270Ph
- 1″ Midrange Horn Driver
- Phenolic Diaphragm
- 106.5 dB – 150 Watts
$33.92
In stock
PRICE FOR SINGLE UNIT
Recommended Products
-
15% Off Cyber Monday Sale!
1” Midrange Horn Drivers + Amplifier Bundle
$200.22 Add to cartCompare- 1” Midrange Vocal Drivers
- 400 Watts Amplifier
- Good Horn Driver Bundle
- + Free Gifts
-
15% Off Cyber Monday Sale!
1200 Watts Vocals & Highs Bundle
$354.08 Add to cartCompare- Amplifier + Drivers + Tweeters
- 4x Midrange Horn Drivers
- 4x Titanium Super Tweeters
- 1x 2 Channel Amp
Features
Features
New addition to the 1” Exit phenolic family, the WG270Ph pairs up the D270Ph-S 1″ exit midrange driver with the WG11-25 compact 60° x 60° exponential horn.This combo is all about high vocal output in a small profile.
This horn driver is ideal for high output PA and PRO audio on wheels systems due to its capability to reproduce vocals down to 600 Hz.
- Phenolic diaphragm provides extreme clarity in the critical midrange or vocal range. 106.5 dB efficient driver is perfect for high output audio systems.
- Compact driver design for easy front-mounted installation. No need to remove the driver from the horn to mount it.
- Car audio SPL enthusiasts use this 1” exit driver for vocal reinforcement on 3-way systems. Ideal horn and driver combo for vocal reinforcement.
- Large 2″ copper voice coil can handle up to 150 Watts RMS musical power / 8 Ohm.
- Car audio SPL enthusiasts use this 1” exit driver for vocal reinforcement on 3-way systems. Ideal horn and driver combo for vocal reinforcement.
High temperature copper wire is used for the voice coil that is wound on a Kapton former to withstand high operating temperatures.
The nearly indestructible Phenolic diaphragm structure, designed for vocal reproduction, allows low midrange reproduction from 600 to 8000 Hz, ( RPD270Ph ) is built to resist the elements, perfect for outdoor use.
Designed to reproduce the all-important vocal range with authority in the smallest profile.
The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn. Download here the Baffle Cut out Instructions
TRIO by PRV uses the latest Brazilian phenolic technology designed for vocal reproduction.
Combining our company’s extensive experience, and its commitment to customer satisfaction, we have created a compact yet very powerful driver that solves the critical component spacing issue.
PRV Trio 1″ Midrange Horn Driver WG270Ph 150 Watts 8 Ohm – Phenolic Diaphragm
Recommended Amplifier configurations and crossover points:
2 Drivers – 1x QS400.4 at 2 Ohm, 2 drivers in parallel on a bridged channel
4 Drivers – 1x MDX1200.2 at 2 Ohm, 4 drivers in parallel on 1 channel ( Bundle Available )
8 Drivers – 1x MDX1200.2 at 2 Ohm, 4 drivers in parallel per channel
( Other channels on the amplifier may be used for Tweeters to provide a full spectrum of sound )
Recommended HPF using PRV Digital Signal Processor DSP when using up to 150 Watts RMS musical power ( without clipping )
- 600 Hz at 12 dB per octave filter Crossover / BT12
- 500 Hz at 18 dB per octave filter Crossover / BT18
If you have super tweeters on your system the recommended LPF is 8,000 at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system.
Technical Details
GENERAL SPECIFICATIONS
| Exit Throat Diameter | 1” (25.4mm) |
| Nominal impedance | 8 Ohm |
| Nominal Power Handling | 75 Watts |
| Continuous Program Power (RMS) | 150 Watts |
| Peak Power | 300 Watts |
| Sensitivity 2.83V at 1m | 106.5 dB |
| Recommended Hi Pass Crossover** **For Full Power Handling | 500 Hz** **12db Per Octave Crossover |
| Frequency Response at -10dB | 600 – 8,000 Hz |
| Voice Coil Diameter | 2″ (50 mm) |
| Voice Coil Wire | Copper |
| Voice Coil Former Material | Kapton |
| Diaphragm Material | Phenolic |
| Flux Density | 1.10 T |
| Magnet Material | Ferrite |
EXTRA INFO
| Overall Depth | 5.00” (127 mm) |
| Mounting Depth | 4.72” (120 mm) |
| Overall Width | 4.54” (115.5 mm) |
| Overall Height | 4.54” (115.5 mm) |
| Baffle Cutout Diameter | 4.01” (102 mm) |
| Net Weight | 2.69 lbs (1.22 kg) |
| Shipping Weight | 3.02 lbs (1.37 kg) |
| Carton Dimensions W x L x H | 4.72” x 4.72” x 5.31” (120 x 120 x 135 mm) |
Repair Parts
Replacement Diaphragm for WG270Ph
Videos
1” Midrange Horn Drivers + Amplifier Bundle
1” Midrange Horn Drivers + Amplifier Bundle 1:2 Product Overview ⬇️ DOWNLOAD
28 reviews for WG270Ph
| 5 star | 100% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Customer Images
WG270Ph
Q & A
WG270Ph
I have been using the horns for years they are durable and never fails in sound quality. Excellent A+++++
This is the way to good when you need more vocals!!
The only horns i will purchase!!!
Best horns ever I will never run anything in my builds besides prv for mids and highs ! Currently have 2 horns 14 mids and 8 tweets and love them !
WG270Ph
Best speaker bought
Love to
Excelente equipo de audio. Excelente servicio que ofrecen, el envío de la mercancía es súper rápido, agradecido y seguire comprándole mercancía, gracias
Excelente equipo de audio. Excelente servicio que ofrecen, el envo de la mercanca es sper rapido, agradecido y seguire comprndole mercanca, gracias