FREE SHIPPING! - 48-STATES ON ORDERS OVER $15
Shopping cart
$0.00
10" MIDBASS LOUDSPEAKER

10MB1000FT

In stock

-

  • 10″ Midbass – 8 Ohm
  • Ferrite Magnet
  • 97.5 dB – 1000 Watts

$149.91

In stock

PRICE FOR SINGLE UNIT

SKU: 10MB1000FT Category: Tags: ,

Features

Features

Combining high output with low distortion midbass response, PRV Audio’s 10MB1000FT 10″ professional midbass loudspeaker is the perfect choice for high-powered sound reinforcement speakers, stage monitors, and even high SPL PROAudioOnWheels systems.

A great new addition to the Forte Series, where more power handling and less distortion on mid low mid bass frequencies is the key. The 10MB1000FT is a rugged 10″ midbass that combines midbass punch and mid clarity at remarkable SPL output with low distortion and extended midbass response. Optimized for use in compact enclosures, this mid bass speaker is built to perform on low midbass frequencies with authority, while providing a smooth vocal response and useful response up to 7,000 Hz, making it a great choice for larger 2 and 3 way systems.

10MB1000FT---Highlights---Cone---514px

Highlights

  • 3″ Inside/Out copper clad aluminum wire on glass fiber former for hi-temp performance, 8 ohms
  • Ventilated voice coil gap reduces power compression
  • High Xmax for more midbass output
  • 1000 watts continuous program power rating makes the high acoustical output
  • Built to Perform! It will stand up to considerable use and abuse.

10MB1000FT---Highlights---Cone---514px
To get superior fidelity, the special composite cone is built with non-pressed paper for a reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker. The Perfect speaker for TUKUTEO® sound. The high sensitivity rating of 97.5 dB 1W/1M which makes it capable of generating a lot of output! This 10″ is a great mid bass option for pro audio systems or high SPL automotive systems, where extremely high output is required.

RK10MR1003FT
The voice coil is wound on a 3″ glass fiber with Copper Clad aluminum wire keeping weight to a minimum for an incredibly quick transient response. Engineered with 11 mm of winding depth, this inside/outside voice coil provides excellent thermal and mechanical durability.

Technical Details

GENERAL SPECIFICATIONS

Nominal Diameter 10″ (254 mm)
Nominal impedance 8 Ohms
Nominal Power Handling* 500 Watts
Continuous Program Power (RMS)** 1000 Watts
Max Peak Power*** 2000 Watts
Sensitivity 2.83V at 1m 97.5 dB
Recommended Hi Pass Crossover For Full Power Handling 120 Hz 12db Per Octave Crossover
Frequency Response 75- 7,000 Hz
Voice Coil Diameter 3″ (75 mm)
Voice Coil Wire CCAW
Voice Coil Winding Depth 16.5 mm
Former Material Glass Fiber
Magnetic Gap Depth 9.5 mm
Frame Material Die Cast Aluminum

*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.
**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation.
***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.


THIELE-SMALL PARAMETERS

Equivalent Volume Vas 32.3 l
Excursion (mathematical)*** Xmax 5.87 mm
Free Air Resonance Fs 75.0 Hz
Mechanical Factor Qms 12.41
Electrical Factor Qes 0.33
Total Factor Qts 0.32
Cone Area Sd 380 cm²
Mechanical Mass Mms 28.10 g
Bl Factor Bl 14.49 Tm
Dc Resistance Re 5.3 Ohm
Inductance Le 0.26 mH at 1 kHz
Mechanical Mass Without Air Mmd 23.30 g
Mechanical Compliance Cms 0.160 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4


EXTRA INFO

Overall Diameter 10.25” (260.5 mm)
Front Mount Baffle Cutout 9.01” (229 mm)
Mounting Depth 4.40” (111.5 mm)
Overall Depth 4.96” (126 mm)
Net Weight 15.0 Lbs (6.8 kg)
Shipping Weight 16.6 Lbs (7.54 kg)
Carton Dimensions W x L x H 11.61”x 11.61” x 6.30” (295 x 295 x 160mm)
10MB1000FT
WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.govView our Return Policy.

Customer Reviews

Based on 12 reviews
100%
(12)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
J.L.A.G.
10ft1000wat 8ohm

La mejor bocinas tukuteo y voz clarita

R
Ronald Schukay

I bought 4 of them for a soundbar for a Jeep hi and they are perfect for it

H
HECTOR ACEVEDO

10MB1000FT

E
Eugene Davis

10MB1000FT

K
Kemuel Mangru
PRV10MB1000FT

Best speaker out there !

×

Get your free gift!

PRV Lanyard
Orders above $50 get a
Free PRV Lanyard
PRV Microfiber Towel
Orders above $250 get a
Free PRV Microfiber Towel
PRV Banner
Orders above $500 get a
Free PRV Classic Banner
PRV Banner
Orders above $1000 get a
Free PRV Team Backpack